Invisible Flash Night Vision Hunting and Trail Camera Pictures and Videos

Invisible Night Vision hunting and trail camera. This self contained camera will take still pictures, day and night. User programmed so you can choose the number of pictures per incident of motion. Each time the front, left or right motion sensor is activated the camera will take a picture. With less than a 1 second delay you will not miss any action. Using 940NM (nanometers) this self contained camera has no bright visible flash this is a great camera for sheds, garages and barns where no power is available.

The batteries (4AA or 8AA not included) will power the night camera for up to 6 months! A included external battery pack add on will give you long battery life. The battery life is based on the number of pictures it is programmed to take for each event. So if you set the camera to take 1 picture per motion event you may get several months of battery life. If you set the camera for 10 pictures per every event batteries may last just a few days. use this invisible night vision camera day or night for high quality pictures and videos.

This camera is user programmable for video or pictures. Number of pictures per motion event. Video length per motion event. You can customize the way this camera works to suit your needs. A higher quality picture and higher number of pictures may be good for your garage to see who is taking tools but uses batteries faster, A lower quality setting and less pictures may be good for places where you just want an over view of the activity this also gives you much more battery life. You will need to experiment with the settings so you get the information you want and the battery life you need.

• Camera type Night vision, snap shot, video recorder
• Image sensor 3-5- 12Mega Pixels color CMOS User set
• Maximum Pixel Size 2560x1920
• Lens F=3.1; FOV=52°; Auto IR-cut-remove
• IR-flash 20m 940NM
• TFT display screen 48x35.69mm (2.36");480(RGB)*234DOT; 16.7M color
• Operation keypad 6keys
• Memory SD card from 1GB  to 16GB
• Picture size 5MP = 2560x1920; 3MP = 2048x1536;12MP=4000X3000
• Video size 640x480: 20fps; 320x240: 20fps
• PIR sensitivity PIR with 3 sensitivity level: High/Normal/Low
•  PIR inducting distance 20m（-32 -~+77°C with normal level）
• Prepared PIR inducting  angle Left and right Include angle of the 2 lenses is 100°;each lens induce 10° PIR  inducting  angle 35°
• Operation  Day/Night
• Response time 1s Triggering interval  0sec. - 60min. programmable
• Shooting numbers 1~3 
• Video length 1-60sec.  programmable
• Time stamp  On /Off
• Time switch On /Off  time lapse programmable
• Starting password  4 protection number
• Device serial No. 4 number set by yourself
• Power supply 4xAA , can add to 8XAA（need the additional battery box）
• Stand-by current  0.4mA Stand-by time 3～6months（4xAA～8XAA）
• Auto power off Auto power off in 2minutes while no keypad controlling
• Power consumption 150mA (+450mA when IR LED lighted)
• Interface TV out (NTSC); USB; SD card holder; 6V DC external
• Fixation Belt, tripod nail 
• Operation temperature -25 -~+70°C
• Operation humidity 5% - 95%
• Certificate FCC

Click on the links below to see the picture. The pictures are very large. All Taken @ 5 MP. Please email for samples of 12 MP

Picture 1
Picture 2
Picture 3
Picture 4